common-auth 0000644 00000002364 15237705726 0006741 0 ustar 00 #
# /etc/pam.d/common-auth - authentication settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authentication modules that define
# the central authentication scheme for use on the system
# (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the
# traditional Unix authentication mechanisms.
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
auth required pam_hulk.so
auth [success=1 default=ignore] pam_unix.so nullok
# here's the fallback if no module succeeds
auth requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
auth required pam_permit.so
# and here are more per-package modules (the "Additional" block)
auth optional pam_cap.so
# end of pam-auth-update config
common-session-noninteractive 0000644 00000002633 15237705726 0012510 0 ustar 00 #
# /etc/pam.d/common-session-noninteractive - session-related modules
# common to all non-interactive services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of all non-interactive sessions.
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
session [default=1] pam_permit.so
# here's the fallback if no module succeeds
session requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
session required pam_permit.so
# The pam_umask module will set the umask according to the system default in
# /etc/login.defs and user settings, solving the problem of different
# umask settings with different shells, display managers, remote sessions etc.
# See "man pam_umask".
session optional pam_umask.so
# and here are more per-package modules (the "Additional" block)
session required pam_unix.so
# end of pam-auth-update config
su-l 0000644 00000000211 15237705726 0005357 0 ustar 00 #%PAM-1.0
auth include su
account include su
password include su
session optional pam_keyinit.so force revoke
session include su
dovecot 0000644 00000000235 15237705726 0006150 0 ustar 00 #%PAM-1.0
auth required pam_nologin.so
auth include system-auth
account include system-auth
session include system-auth
cron 0000644 00000001136 15237705726 0005447 0 ustar 00 # The PAM configuration file for the cron daemon
@include common-auth
# Sets the loginuid process attribute
session required pam_loginuid.so
# Read environment variables from pam_env's default files, /etc/environment
# and /etc/security/pam_env.conf.
session required pam_env.so
# In addition, read system locale information
session required pam_env.so envfile=/etc/default/locale
@include common-account
@include common-session-noninteractive
# Sets up user limits, please define limits for cron tasks
# through /etc/security/limits.conf
session required pam_limits.so
sudo 0000644 00000000512 15237705726 0005455 0 ustar 00 #%PAM-1.0
# Set up user limits from /etc/security/limits.conf.
session required pam_limits.so
session required pam_env.so readenv=1 user_readenv=0
session required pam_env.so readenv=1 envfile=/etc/default/locale user_readenv=0
@include common-auth
@include common-account
@include common-session-noninteractive
chsh 0000644 00000001333 15237705726 0005432 0 ustar 00 #
# The PAM configuration file for the Shadow `chsh' service
#
# This will not allow a user to change their shell unless
# their current one is listed in /etc/shells. This keeps
# accounts with special shells from changing them.
auth required pam_shells.so
# This allows root to change user shell without being
# prompted for a password
auth sufficient pam_rootok.so
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
@include common-auth
@include common-account
@include common-session
account required pam_succeed_if.so shell != /usr/local/cpanel/bin/noshell
account required pam_succeed_if.so shell != /usr/local/cpanel/bin/jailshell
chpasswd 0000644 00000000134 15237705726 0006317 0 ustar 00 # The PAM configuration file for the Shadow 'chpasswd' service
#
@include common-password
common-session 0000644 00000002623 15237705726 0007461 0 ustar 00 #
# /etc/pam.d/common-session - session-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of interactive sessions.
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
session [default=1] pam_permit.so
# here's the fallback if no module succeeds
session requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
session required pam_permit.so
# The pam_umask module will set the umask according to the system default in
# /etc/login.defs and user settings, solving the problem of different
# umask settings with different shells, display managers, remote sessions etc.
# See "man pam_umask".
session optional pam_umask.so
# and here are more per-package modules (the "Additional" block)
session required pam_unix.so
session optional pam_systemd.so
# end of pam-auth-update config
runuser-l 0000644 00000000212 15237705726 0006434 0 ustar 00 #%PAM-1.0
auth include runuser
session optional pam_keyinit.so force revoke
-session optional pam_systemd.so
session include runuser
runuser 0000644 00000000217 15237705726 0006210 0 ustar 00 #%PAM-1.0
auth sufficient pam_rootok.so
session optional pam_keyinit.so revoke
session required pam_limits.so
session required pam_unix.so
login 0000644 00000010026 15237705726 0005614 0 ustar 00 #
# The PAM configuration file for the Shadow `login' service
#
# Enforce a minimal delay in case of failure (in microseconds).
# (Replaces the `FAIL_DELAY' setting from login.defs)
# Note that other modules may require another minimal delay. (for example,
# to disable any delay, you should add the nodelay option to pam_unix)
auth optional pam_faildelay.so delay=3000000
# Outputs an issue file prior to each login prompt (Replaces the
# ISSUE_FILE option from login.defs). Uncomment for use
# auth required pam_issue.so issue=/etc/issue
# Disallows other than root logins when /etc/nologin exists
# (Replaces the `NOLOGINS_FILE' option from login.defs)
auth requisite pam_nologin.so
# SELinux needs to be the first session rule. This ensures that any
# lingering context has been cleared. Without this it is possible
# that a module could execute code in the wrong domain.
# When the module is present, "required" would be sufficient (When SELinux
# is disabled, this returns success.)
session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
# Sets the loginuid process attribute
session required pam_loginuid.so
# Prints the message of the day upon successful login.
# (Replaces the `MOTD_FILE' option in login.defs)
# This includes a dynamically generated part from /run/motd.dynamic
# and a static (admin-editable) part from /etc/motd.
session optional pam_motd.so motd=/run/motd.dynamic
session optional pam_motd.so noupdate
# SELinux needs to intervene at login time to ensure that the process
# starts in the proper default security context. Only sessions which are
# intended to run in the user's context should be run after this.
# pam_selinux.so changes the SELinux context of the used TTY and configures
# SELinux in order to transition to the user context with the next execve()
# call.
session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
# When the module is present, "required" would be sufficient (When SELinux
# is disabled, this returns success.)
# This module parses environment configuration file(s)
# and also allows you to use an extended config
# file /etc/security/pam_env.conf.
#
# parsing /etc/environment needs "readenv=1"
session required pam_env.so readenv=1
# locale variables can also be set in /etc/default/locale
# reading this file *in addition to /etc/environment* does not hurt
session required pam_env.so readenv=1 envfile=/etc/default/locale
# Standard Un*x authentication.
@include common-auth
# This allows certain extra groups to be granted to a user
# based on things like time of day, tty, service, and user.
# Please edit /etc/security/group.conf to fit your needs
# (Replaces the `CONSOLE_GROUPS' option in login.defs)
auth optional pam_group.so
# Uncomment and edit /etc/security/time.conf if you need to set
# time restraint on logins.
# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
# as well as /etc/porttime)
# account requisite pam_time.so
# Uncomment and edit /etc/security/access.conf if you need to
# set access limits.
# (Replaces /etc/login.access file)
# account required pam_access.so
# Sets up user limits according to /etc/security/limits.conf
# (Replaces the use of /etc/limits in old login)
session required pam_limits.so
# Prints the last login info upon successful login
# (Replaces the `LASTLOG_ENAB' option from login.defs)
session optional pam_lastlog.so
# Prints the status of the user's mailbox upon successful login
# (Replaces the `MAIL_CHECK_ENAB' option from login.defs).
#
# This also defines the MAIL environment variable
# However, userdel also needs MAIL_DIR and MAIL_FILE variables
# in /etc/login.defs to make sure that removing a user
# also removes the user's mail spool file.
# See comments in /etc/login.defs
session optional pam_mail.so standard
# Create a new session keyring.
session optional pam_keyinit.so force revoke
# Standard Un*x account and session
@include common-account
@include common-session
@include common-password
passwd 0000644 00000000134 15237705726 0006004 0 ustar 00 #
# The PAM configuration file for the Shadow `passwd' service
#
@include common-password
common-account 0000644 00000002270 15237705727 0007431 0 ustar 00 #
# /etc/pam.d/common-account - authorization settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authorization modules that define
# the central access policy for use on the system. The default is to
# only deny service to users whose accounts are expired in /etc/shadow.
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
#
# here are the per-package modules (the "Primary" block)
account [success=1 new_authtok_reqd=done default=ignore] pam_unix.so
# here's the fallback if no module succeeds
account requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
account required pam_permit.so
# and here are more per-package modules (the "Additional" block)
# end of pam-auth-update config
vmtoolsd 0000644 00000000167 15237705727 0006361 0 ustar 00 # PAM configuration for vmtoolsd
@include common-auth
account required pam_shells.so
@include common-account
newusers 0000644 00000000134 15237705727 0006357 0 ustar 00 # The PAM configuration file for the Shadow 'newusers' service
#
@include common-password
other 0000644 00000001010 15237705727 0005617 0 ustar 00 #
# /etc/pam.d/other - specify the PAM fallback behaviour
#
# Note that this file is used for any unspecified service; for example
#if /etc/pam.d/cron specifies no session modules but cron calls
#pam_open_session, the session module out of /etc/pam.d/other is
#used. If you really want nothing to happen then use pam_permit.so or
#pam_deny.so as appropriate.
# We fall back to the system default in /etc/pam.d/common-*
#
@include common-auth
@include common-account
@include common-password
@include common-session
chfn 0000644 00000001026 15237705727 0005423 0 ustar 00 #
# The PAM configuration file for the Shadow `chfn' service
#
# This allows root to change user infomation without being
# prompted for a password
auth sufficient pam_rootok.so
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
@include common-auth
@include common-account
@include common-session
account required pam_succeed_if.so shell != /usr/local/cpanel/bin/noshell
account required pam_succeed_if.so shell != /usr/local/cpanel/bin/jailshell
sudo-i 0000644 00000000473 15237705727 0005712 0 ustar 00 #%PAM-1.0
# Set up user limits from /etc/security/limits.conf.
session required pam_limits.so
session required pam_env.so readenv=1 user_readenv=0
session required pam_env.so readenv=1 envfile=/etc/default/locale user_readenv=0
@include common-auth
@include common-account
@include common-session
exim 0000644 00000000164 15237705727 0005451 0 ustar 00 #%PAM-1.0
auth required /lib/security/pam_pwdb.so shadow nullok
account required /lib/security/pam_pwdb.so
atd 0000644 00000000372 15237705727 0005260 0 ustar 00 #
# The PAM configuration file for the at daemon
#
@include common-auth
@include common-account
session required pam_loginuid.so
@include common-session-noninteractive
session required pam_limits.so
auth required pam_env.so user_readenv=1
postgresql_cpses 0000644 00000000106 15237705727 0010103 0 ustar 00 #%PAM-1.0
auth required pam_cpses.so
account required pam_cpses.so
common-password 0000644 00000003124 15237705727 0007636 0 ustar 00 #
# /etc/pam.d/common-password - password-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define the services to be
# used to change user passwords. The default is pam_unix.
# Explanation of pam_unix options:
# The "yescrypt" option enables
#hashed passwords using the yescrypt algorithm, introduced in Debian
#11. Without this option, the default is Unix crypt. Prior releases
#used the option "sha512"; if a shadow password hash will be shared
#between Debian 11 and older releases replace "yescrypt" with "sha512"
#for compatibility . The "obscure" option replaces the old
#`OBSCURE_CHECKS_ENAB' option in login.defs. See the pam_unix manpage
#for other options.
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
password [success=1 default=ignore] pam_unix.so obscure yescrypt
# here's the fallback if no module succeeds
password requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
password required pam_permit.so
# and here are more per-package modules (the "Additional" block)
# end of pam-auth-update config
sshd 0000644 00000004125 15237705727 0005451 0 ustar 00 # PAM configuration for the Secure Shell service
# Standard Un*x authentication.
@include common-auth
# Disallow non-root logins when /etc/nologin exists.
account required pam_nologin.so
# Uncomment and edit /etc/security/access.conf if you need to set complex
# access limits that are hard to express in sshd_config.
# account required pam_access.so
# Standard Un*x authorization.
@include common-account
# SELinux needs to be the first session rule. This ensures that any
# lingering context has been cleared. Without this it is possible that a
# module could execute code in the wrong domain.
session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
# Set the loginuid process attribute.
session required pam_loginuid.so
# Create a new session keyring.
session optional pam_keyinit.so force revoke
# Standard Un*x session setup and teardown.
@include common-session
# Print the message of the day upon successful login.
# This includes a dynamically generated part from /run/motd.dynamic
# and a static (admin-editable) part from /etc/motd.
session optional pam_motd.so motd=/run/motd.dynamic
session optional pam_motd.so noupdate
# Print the status of the user's mailbox upon successful login.
session optional pam_mail.so standard noenv # [1]
# Set up user limits from /etc/security/limits.conf.
session required pam_limits.so
# Read environment variables from /etc/environment and
# /etc/security/pam_env.conf.
session required pam_env.so # [1]
# In Debian 4.0 (etch), locale-related environment variables were moved to
# /etc/default/locale, so read that as well.
session required pam_env.so user_readenv=1 envfile=/etc/default/locale
# SELinux needs to intervene at login time to ensure that the process starts
# in the proper default security context. Only sessions which are intended
# to run in the user's context should be run after this.
session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
# Standard Un*x password updating.
@include common-password
su 0000644 00000004323 15237705727 0005137 0 ustar 00 #
# The PAM configuration file for the Shadow `su' service
#
# This allows root to su without passwords (normal operation)
auth sufficient pam_rootok.so
# Uncomment this to force users to be a member of group wheel
# before they can use `su'. You can also add "group=foo"
# to the end of this line if you want to use a group other
# than the default "wheel" (but this may have side effect of
# denying "root" user, unless she's a member of "foo" or explicitly
# permitted earlier by e.g. "sufficient pam_rootok.so").
# (Replaces the `SU_WHEEL_ONLY' option from login.defs)
# auth required pam_wheel.so
# Uncomment this if you want wheel members to be able to
# su without a password.
# auth sufficient pam_wheel.so trust
# Uncomment this if you want members of a specific group to not
# be allowed to use su at all.
# auth required pam_wheel.so deny group=nosu
# Uncomment and edit /etc/security/time.conf if you need to set
# time restrainst on su usage.
# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
# as well as /etc/porttime)
# account requisite pam_time.so
# This module parses environment configuration file(s)
# and also allows you to use an extended config
# file /etc/security/pam_env.conf.
#
# parsing /etc/environment needs "readenv=1"
session required pam_env.so readenv=1
# locale variables are also kept into /etc/default/locale in etch
# reading this file *in addition to /etc/environment* does not hurt
session required pam_env.so readenv=1 envfile=/etc/default/locale
# Defines the MAIL environment variable
# However, userdel also needs MAIL_DIR and MAIL_FILE variables
# in /etc/login.defs to make sure that removing a user
# also removes the user's mail spool file.
# See comments in /etc/login.defs
#
# "nopen" stands to avoid reporting new mail when su'ing to another user
session optional pam_mail.so nopen
# Sets up user limits according to /etc/security/limits.conf
# (Replaces the use of /etc/limits in old login)
session required pam_limits.so
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
@include common-auth
@include common-account
@include common-session
polkit-1 0000644 00000000416 15240003424 0006122 0 ustar 00 #%PAM-1.0
@include common-auth
@include common-account
@include common-password
session required pam_env.so readenv=1 user_readenv=0
session required pam_env.so readenv=1 envfile=/etc/default/locale user_readenv=0
@include common-session-noninteractive
systemd-user 0000644 00000000554 15240003424 0007131 0 ustar 00 # This file is part of systemd.
#
# Used by systemd --user instances.
@include common-account
session required pam_selinux.so close
session required pam_selinux.so nottys open
session required pam_loginuid.so
session required pam_limits.so
@include common-session-noninteractive
session optional pam_keyinit.so force revoke
session optional pam_systemd.so